Park Avenue V6-3.8L SC VIN 1 (2005)
9. Remove the oil filter. Use a long screwdriver in order to pry the oil filter neck out of the seal.
10. Check the oil filter seal for damage or wear.
11. As needed, remove the seal using the J 6125-1B and the J 23129.
Installation Procedure
1. Install a new seal, as needed. Before installing, coat the new seal with a small amount of J 36850 or petroleum jelly.
2. Install a new filter into the case.
3. Important: Oil pan gaskets are reusable. Only replace if sealing surface is damaged.
Install the oil pan (24) and the gasket (25) at the same time.
