Park Avenue V6-3.8L SC VIN 1 (2005)
11. Push up on the frame rail bolts in order to clear the mount as the top of the mount is tilted away from the vehicle.
12. Remove the mount (2) from the vehicle.
Installation Procedure
1. Insert the mount stud into the transaxle mount bracket.
2. Push up on the frame rail bolts in order to clear the mount (2) as the mount is rotated into the proper position.
3. Make sure the loose frame rail bolts are properly aligned with and inserted into the mount.
4. Lower the vehicle.
5. Notice: Refer to Fastener Notice in Service Precautions.
Install the frame rail bolt retaining screws.
^
Tighten the frame rail bolt retaining screws to 4 Nm (35 inch lbs.).
6. Raise the vehicle.
7. Install the mount bolt (1) and rotate counter clockwise to ensure anti-rotation tab locks behind mount bracket.
8. Install the mount nuts (4) and (3).
^
Tighten the mount nuts (4) and (3) to 70 Nm (52 ft. lbs.).
