Park Avenue V6-3.8L SC VIN 1 (2005)
5. Remove the valve body. Leave the spacer plate with the transmission.
6. Remove the spacer plate and the spacer plate gasket, as necessary.
7. Remove the solenoid screens.
Installation Procedure
1. Notice: The assembly of some components will require the use of an assembly lube. Always use J 36850 Transjel or petroleum jelly during
assembly. Greases other than the recommended assembly lube will change the transmission fluid characteristics and cause undesirable shift
conditions and/or filter clogging.
Inspect the control valve body spacer plate (370) for the following conditions:
^
Plugged holes
^
Damaged gasket sealing surfaces
^
Plugged or damaged screen/seal assemblies (382)
