Park Avenue V6-3.8L SC VIN 1 (2005)
6. Separate the urethane adhesive from the window.
*
Leave a base of urethane on the pinchweld flange.
*
The only suitable lubrication is clear water.
*
Use J 24402-A , J 39032 or equivalent in order to remove the quarter window.
7. With the aid of an assistant, lift the rear window from the opening using suction cups.
Installation Procedure
1. Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows (See: Service and Repair/Urethane
Adhesive Installation of Stationary Windows) .
2. Install the rear sail panels. Refer to Sail Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Sail
Panel Replacement) in Interior Trim.
3. Connect the rear window defogger connectors.
4. Install the rear window lower garnish molding and the fasteners that secure the molding to the body.
5. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
6. Close the rear compartment.
