Park Avenue V6-3.8L SC VIN 1 (2005)
Windshield Washer Pump: Service and Repair
WASHER PUMP/RESERVOIR REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the electrical connector from the washer pump.
2. Disconnect the electrical connector from the washer solvent container level sensor.
3. Disconnect the washer hose from the washer pump.
4. Drain the washer solvent into a suitable container.
5. Remove the brake master cylinder mounting nuts.
IMPORTANT: Do not disconnect the hydraulic brake pipes from the master cylinder.
6. Carefully position the brake master cylinder toward the passenger compartment.
7. Remove the 2 nuts from the washer solvent container.
8. The washer solvent container has a tab which is located to a slot in the vehicle body rail.
9. Lift upward, in order to remove the washer solvent container from the vehicle.
10. Remove the washer pump and the grommet from the washer solvent container.
11. Remove the washer solvent level sensor from the washer solvent container.
INSTALLATION PROCEDURE
1. Install the washer solvent level sensor into the washer solvent container.
