Park Avenue V6-3.8L VIN K (1995)
Audible Warning Device: Component Tests and General Diagnostics
General Information
The audio alarm system brings the driver's attention to one or more of several conditions:
1. Lamps are on, ignition switch is set to "LOCK," "OFF" or 'ACCY," and driver's door is open;
2. Ignition key is in ignition switch and is set to "LOCK," "OFF," or "ACCY," and driver's door is open;
3. Safety belt is unbuckled and ignition switch is in "RUN," "BULB TEST," or "START;" and
4. A turn signal is left on and vehicle has traveled over 1.2 km (3/4 mile);
5. Park brake has been left engaged and either vehicle has traveled approximately 50 feet (indicators cluster) or vehicle is shifted out of "PARK" or
"NEUTRAL" (gages and digital clusters). The Multi-Function Chime (MFC) module is also used as the audible alarm for the reminder package
(Y67).
Voltage is applied at all times through I/P Fuse Block Fuse 9C to Multi-Function Chime (MFC) module terminal Al to power the module. Voltage is
applied at all times through I/P Fuse Block Fuse 6C to the head/park lamp switch. Voltage is applied through the head/park lamp switch in "OFF" to the
lamps off input of the module.
With the ignition switch in "RUN," "BULB TEST," or "START," voltage is applied through I/P Fuse Block Fuse 1D to module terminal A3.
