Park Avenue V6-3.8L VIN K (1995)
Interior Lighting Module: Testing and Inspection
Troubleshooting Hints
TRY FOLLOWING CHECKS BEFORE DOING SYSTEM DIAGNOSIS
1. If courtesy lamps do not light, check I/P Fuse Block Fuse 6A. Check I/P Fuse Block Fuse ID by visual inspection.
2. Check Relay Center Fuse 2 by visual inspection.
3. If only one interior lamp does not operate, check bulb, socket and related wiring.
4. Check that grounds G202 and G203 are clean and tight.
5. Before component replacement, check for poor connections at related component and in-line harness connector terminal connections. Refer to
General Troubleshooting Hints. See: Diagrams/Diagnostic Aids
^
Refer to System Check for a guide to normal operation.
