buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Recall - Parking Brake Lever Assembly|Page 4399 > < Recall - Parking Brake Lever Assembly|Page 4396
Page 1
background image

Parking Brake Lever: All Technical Service Bulletins
Recall - Parking Brake Lever Assembly

Model Year:
1992

Bulletin No.: 
92-C-2

File in Group:
5

Number:
1

Date:
Oct. , 91

SUBJECT:
PARKING BRAKE LEVER ASSEMBLY

MODELS AFFECTED:
CERTAIN 1991 PARK AVENUE/ULTRA AND 1992 LESABRE MODELS

This bulletin has been supplemented by TSB# 92C2A dated Oct. '91.

The National Traffic and Motor Vehicle Safety Act, as amended, provides that each vehicle which is subject to a recall campaign of this type must be
adequately repaired within a reasonable time after the owner has tendered it for repair. A failure to repair within sixty (60) days after tender of a vehicle
is prima facie evidence of failure to repair within a reasonable time.

If the condition is not adequately repaired within a reasonable time, the owner may be entitled to an identical or reasonably equivalent vehicle at no
charge or to a refund of the purchase price less a reasonable allowance for depreciation.

To avoid having to provide these burdensome solutions, every effort must be made to promptly schedule an appointment with each owner and to repair
their vehicle as soon as possible. As you will see in reading the copy of the letter which is being sent to owners, the owners are being instructed to
contact the Buick Customer Assistance Center if their dealer does not remedy the condition within five (5) days of the mutually agreed upon service date.
If the condition is not remedied within a reasonable time, they are instructed on how to contact the National Highway Traffic Safety Administration.

CONDITION

General Motors has determined that certain 1991 Park Avenue/Ultra and 1992 LeSabre model vehicles fail to conform to Federal Motor Vehicle Safety
Standard 105, "Hydraulic Brake Systems" which, in part, covers parking brake performance.

Some of these vehicles have parking brake lever assemblies which when applied can release one or more teeth. If release occurs, the cable load applying
the rear brakes will be reduced, and depending upon the extent of lever release, the parking brake may not hold the vehicle as required.

DEALER ACTION

To prevent this condition from occurring, dealers are to inspect and, if required, replace the parking brake lever assembly.

VEHIC-LES INVOLVED

Involved are certain 1991 Park Avenue/Ultra and 1992 LeSabre model vehicles built within the following VIN breakpoints:

PLANT
YEAR MODEL

PLANT

CODE

FROM

THROUGH

1991

Park Avenue/

Wentzville

1

M1682941

M1696285

Ultra

1992

LeSabre

Buick City

H

NH400026

NH401426

NOTE:
There are an estimated 13,592 vehicles involved within these VIN ranges.

Recall - Parking Brake Lever Assembly|Page 4399 > < Recall - Parking Brake Lever Assembly|Page 4396