Park Avenue Ultra V6-3.8L SC VIN 1 (1991)
Removal Procedure (Refer to Illustration)
1.
Remove the rear sight shield.
2.
Remove the fuel line retainer from the front of dash attachment.
3.
Remove the fuel line retainer from the fuel lines.
4.
Remove the threaded stud by unscrewing it from the front of dash attachment.
Installation Procedure (Refer to illustration)
1.
Install the new fuel line retainer, P/N 25632670, to the front of dash attachment with the retaining clip latch on top.
2.
Place the fuel lines in the new retainer with the 3/8" line on the bottom and the 5/16" line on the top.
Important:
The fuel lines MUST be located in the retaining clip between the two location "UPSETS" on the fuel lines.
3.
Close the retainer latch and snap the latch closed.
4.
Install the rear sight shield.
Parts information
Parts are currently available from GMSPO.
Warranty information
For vehicles repaired under warranty, use:
Labor Operation
Labor Time
L0102
0.4 hrs.