buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Spark Plug|Specifications > < All Technical Service Bulletins for Spark Plug:|936E13|Page 3165
Page 1
background image

Spark Plug: All Technical Service Bulletins
Igntition - New Design Spark Plug

Bulletin:

92-6E-15

Date:

Mar. '92

Ref. No.: 92-164-6E

Corp. Ref. No.: 206501

SUBJECT:
NEW DESIGN SPARK PLUG (SERVICE INFORMATION)

MODELS AFFECTED:
1992 PARK AVENUE, RIVIERA, LESABRE AND REGAL MODELS WITH 3800 T.P.I. (CODE L) ENGINE 1992 ULTRA MODELS WITH 3800
SUPERCHARGED (CODE 1) ENGINE 1992 CENTURY AND SKYLARK MODELS WITH 3300 M.F.I. (CODE N) ENGINE

This bulletin is to inform technicians of a change in the spark plugs for vehicles with the 3300 MFI (Code N) engine, the 3800 T.P.I. (Code L) engine,
and the 3800 Supercharged (Code 1) engine.

In February of 1992, a new spark plug was released in production for the engines listed above to improve the spark plug to spark plug boot connection.

Exposure to underhood temperatures over periods of time has the tendency to increase the bond between the boot and the spark plug ceramic. In the past,
different lubricants have been used in the spark plug boots with varying success. This new spark plug was released to reduce this bonding condition and
to improve the dielectric strength between the plug and the boot.

This new spark plug can be visually identified by its smooth ceramic surface, the ridges have been removed (see figure 1). These new spark plugs have a
anti-stick material coating baked onto the spark plugs outer ceramic surface. This coating is clear with a slightly waxy feel. To further help identify the
new spark plug, the type number has been changed to 41-600 from R45LTS6.

To maintain the reduced bonding characteristics, the Service Replacement Spark Plug 41-600 must be used, Service Package Number 5614253. The
41-600 spark plug is the recommended plug to use in all 1992 models listed above.

PARTS INFORMATION:

Parts are expected to be available on April 13, 1992. In case of limited inventory, parts will be placed on 400 control to waive VIP surcharges. Only
verifiable emergency VIP orders will be accepted. SPO will make every effort to obtain parts. However, the part will be shipped premium transportation
at dealer's expense and all other order types will be placed on backorder until the 400 control is removed.

Spark Plug|Specifications > < All Technical Service Bulletins for Spark Plug:|936E13|Page 3165