Park Avenue Ultra V6-3.8L SC VIN 1 (1991)
Air Bag: Technical Service Bulletins
DOT-E 8236 (Fourth Revision)
1.
TRW Incorporated, Mesa, AZ., is hereby granted an exemption from certain provisions of this Department's Hazardous Materials Regulations to
offer packages prescribed herein of a passive restraint system, and its inflator, for transportation in commerce subject to the limitations and special
requirements specified herein. This exemption authorizes the transportation of inflators and modules for passenger restraining systems as
flammable solids, and provides no relief from any regulation other than as specifically stated. Each of the following is hereby granted the status of
a party to this exemption:
General Motors Corporation, Warren, MI - PTE-1.
Flint packaging incorporated, Burton, 141 - PTE-2.
Ford Motor Company, Dearborn, MI - PTE-3.
2.
BASIS. This exemption is based on TRW Incorporated's application dated April 14, 1989, submitted in accordance with 49 CFR 107.105 and the
public proceeding thereon, and supplemental letters dated December 21, 1989 and September 28, 1990. The granting of party status is based on
the following applications submitted in accordance with 49 CFR 107.111 and the public proceeding thereon:
General motors Corporation's application dated December 9, 1989. Flint Packaging Incorporated's application dated August 23, 1990. Ford Motor
Company's application dated June 20, 1990.
3.
HAZARDOUS MATERIALS (Descriptor and class).
a.
Passive restraint inflators for, and systems generally identified as Part Nos. 91880-1, 91880-3, 91880-7, 98020-1, 98020-3, 98020-5,
E53B-54042B72 and E53B-54043B13 containing not to exceed 105 grams of a propellant identified as TAL 1101 and not to exceed 13
grams of a mixture of boron and potassium nitrate identified in Bureau of Explosives report dated June 21, 1968 as Ignition Composition
1P60 and not to exceed 150 milligrams of a mixture of titanium and potassium perchlorate identified in Bureau of Explosives letter dated
February 27, 1984, as Igniter Part number 174-00381 (DOT approval June 5, 1984, EX-8406010 Class C Explosive). This passive restraint
inflator, and this system are classed as flammable solids".
b.
Inflaters for passenger restraint systems deemed to be scrap material may be classed as flammable solid when packed in accordance with
paragraph 7.b. of this exemption.
4.
PROPER SHIPPING GAME (49 CFR 172.1M. Flammable solid, n.o.s.
5.
REGULATION AFFECTED. # 9 CFR 171.11 (see paragraph 8) 173.153, 173.154, 175.3.
6.
MODES OF TRANSPORTATION AUTHORIZED. Motor vehicle, rail freight, cargo vessel, cargo-aircraft only.
7.
SAFETY CONTROL MEASURES.
a.
Outside packaging prescribed is a DOT Specification 12H or 12B fiberboard box. Packaging of units identified as P/N E53B-54042B72
must also comply with the packaging description on page 3 and Appendix D of the Ford applications.
b.
Scrap inflators may be packed and shipped in a DOT specification 17H drum for disposal purposes only.
8.
SPECIAL PROVISIONS
a.
Persons who receive packages covered by this exemption may reoffer them for transportation provided no modifications or changes are
made to the packages, all terms of this exemption are complied with, and a current copy of this exemption is maintained at each facility from
which such reoffering occurs.
b.
A copy of this exemption must be carried aboard each vessel and aircraft used to transport packages covered by this exemption.
c.
An inflator or a module identified in paragraph 3 above is exempt from the requirements of 49 CFR Parts 100-199 when installed in a motor
vehicle. All other packages shipped under the terms of this exemption, must bear FLAMMABLE SOLID labels regardless of net weight of
the flammable solid in each inside package. In addition, for cargo vessel shipments only, all vehicles and freight containers containing
packages under the terms of this exemption must be placarded FLAMMABLE SOLID.
d.
Domestic shipments via air may be made per the requirements of 49 CFR 171.11. This provision also constitutes an exemotion under Part 1;
1.1 of the ICAO Technical Instructions to authorize the domestic transportation of inflators and modules for passenger vehicle restraint
systems on cargo aircraft using the proper shipping name, hazard class, and UN number (Flammable solid, n.o.s., 4.1, and UN 1325). The
inflators and modules must be packaged in accordance with the provisions of the Safety Control Measures prescribed in paragraph 7 of this
exemption.
e.
The "FLIGHTS OF CARGO-AIRCRAFT ONLY" requirements of Appendix B to 49 CFR Part 107 do not apply to operations subject to
this exemption.
