Rainier 2WD L6-4.2L VIN S (2005)
Trunk / Liftgate Stop: Service and Repair
Bumper Replacement - Liftgate
Removal Procedure
1. Open the liftgate.
2. Remove the bolts that retain the bumper assembly to the body.
3. Remove the bumper assembly from the body.
Installation Procedure
1. Position the bumper assembly to the body.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts that retain the bumper assembly to the body.
Tighten the bolts to 25 N.m (18 lb ft).
3. Close the liftgate.
