Rainier 2WD L6-4.2L VIN S (2005)
1. Install the steering gear crossmember.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the steering gear crossmember mounting bolts.
Tighten
Tighten the steering gear crossmember mounting bolts to 50 N.m (37 lb ft).
3. Install the rear lower control arm bracket to frame mounting bolts.
Tighten
Tighten the rear lower control arm bracket to frame mounting bolts to 240 N.m (177 lb ft).
4. Install the engine shield.
5. Install the engine shield mounting bolts.
Tighten