Rainier 2WD L6-4.2L VIN S (2005)
5. Slide the rear locator (2) from the tab on the moveable roof side rail.
INSTALLATION PROCEDURE
1. Using a flat-bladed tool, press the rear latch spring forward into the channel of the moveable roof frame assembly.
2. Slide the rear locator (2) onto the tab on the moveable roof side rail.
3. Install the rear latch spring (1) onto the retaining pin of the rear locator (2).
4. Slide the rear locator (2) forward until it is flush with the end of the moveable roof frame.