Rainier 2WD L6-4.2L VIN S (2005)
6. Remove the brake pipe to the brake master cylinder.
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the brake pipe to the brake master cylinder.
Tighten the brake pipe fitting 25 Nm (18 inch lbs.).
2. Install the rear brake pipe.
Tighten the brake pipe fitting to 25 Nm (18 inch lbs.).
3. Install the right front brake pipe.
Tighten the brake pipe fitting to 25 Nm (18 inch lbs.).