Rainier 2WD L6-4.2L VIN S (2005)
Air Door Actuator / Motor: Service and Repair
Mode Actuator - Console
MODE ACTUATOR REPLACEMENT - CONSOLE
REMOVAL PROCEDURE
1. Remove the console.
2. Remove the screw from the air outlet duct.
3. Remove the air outlet duct from the console.
4. Remove the rear mode actuator retaining screws.
5. Remove the rear mode actuator.
INSTALLATION PROCEDURE
1. Install the mode actuator.
2. Install the screws to the mode actuator.
Tighten the screws to 1.9 N.m (17 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the air outlet duct to the console.
4. Install the screw to the air outlet duct.
Tighten the screw to 1.9 N.m (17 lb in).
5. Install the console.