Rainier 2WD L6-4.2L VIN S (2005)
Evaporator Core: Service and Repair
Evaporator Block - Auxiliary
EVAPORATOR BLOCK REPLACEMENT - AUXILIARY
REMOVAL PROCEDURE
1. Remove the HVAC module-auxiliary. See: Housing Assembly HVAC/Service and Repair
2. Remove the TORX studs from the evaporator block-auxiliary.
3. Remove the evaporator block-auxiliary (1) from the HVAC module-auxiliary.
INSTALLATION PROCEDURE
1. Install the evaporator block-auxiliary (1) to the HVAC module-auxiliary.
2. Install the TORX studs to the evaporator block-auxiliary.
Tighten the studs to 14 N.m (124 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the HVAC module-auxiliary.
