Rainier 2WD L6-4.2L VIN S (2005)
Tighten
Tighten the nut to 28 N.m (21 lb ft).
Notice: Refer to Fastener Notice in Service Precautions.
4. Connect the auxiliary evaporator tube to the auxiliary piping.
Tighten
Tighten the nut to 28 N.m (21 lb ft).
5. Connect the evaporator tube to the condenser.
Tighten
Tighten the nut to 28 N.m (21 lb ft).
6. Install the coolant recovery tank.
7. Install the washer solvent container.
8. Install the nuts (1, 2) retaining the evaporator tube to the fender.
Tighten
Tighten the nuts to 28 N.m (21 lb ft).
9. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
10. Leak test the fittings of the components using the J 39400-A.