Rainier 2WD L6-4.2L VIN S (2005)
8. Disconnect the positive cable lead from the generator (1).
9. Remove the battery positive cable from the vehicle.
INSTALLATION PROCEDURE
1. Position the battery positive cable in the engine compartment.
2. Install the battery positive cable to the generator and secure with the nut (1).
Tighten the nut to 9 N.m (80 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Connect the positive cable to the starter and secure the positive cable with the nut (1).
Tighten the nut to 9 N.m (80 lb in).
4. Install the battery positive cable harness to the fir-tree retainer on the PCM bracket.
5. Install the battery positive cable into the conduit.
6. Connect the battery cable conduit to the conduit retaining clip.
