Rainier 2WD L6-4.2L VIN S (2005)
1. Install the coil spring and upper mounting plate to the J45400.
2. Turn the spring compressor forcing screw (1) until the coil spring is compressed.
3. Install the shock absorber to the shock module.
4. Install the shock absorber retaining nut.
Tighten
Tighten the shock absorber retaining nut to 45 Nm (33 ft. lbs.).
Notice: Refer to Fastener in Service Precautions.
5. Remove the shock module (2) from the J45400 (1).
6. Remove the pieces of heater hose from the shock module spring.
