Rainier 2WD L6-4.2L VIN S (2005)
Power Window Switch: Service and Repair
Switch Window Position Replacement - Midgate
SWITCH WINDOW POSITION REPLACEMENT - MIDGATE
REMOVAL PROCEDURE
1. Remove the midgate inner panel.
2. Disconnect the electrical connector from the window position switch.
3. Remove the window position switch from the window regulator bracket by sliding it off the window regulator bracket.
INSTALLATION PROCEDURE
1. Install the window position switch to the window regulator bracket by sliding it on the bracket until the retaining feature is fully engaged.
2. Connect the electrical connector to the window position switch.
3. Install the midgate inner panel.