Rainier 2WD L6-4.2L VIN S (2005)
Quarter Window Glass: Service and Repair
Stationary Quarter Window Replacement
Quarter Window Replacement (XUV)
Tools Required
*
J 39032 Stationary Glass Removal Tool
*
Urethane Adhesive Kit GM P/N 12346392 or Equivalent
*
Isopropyl Alcohol or Equivalent
*
Cartridge-type Caulking Gun
*
Commercial-type Utility Knife
*
Razor Blade Scraper
*
Suction Cups
*
Plastic Paddle
Removal Procedure
Caution: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or
personal injury.
Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces
and the interior trim.
1. Open the endgate window.
2. Remove the upper rear roof applique.
Caution: Refer to Glass and Sheet Metal Handling Caution in Service Precautions.
Important: Keep the cutting edge of the tool against the window. Do this from inside the vehicle.
3. This will allow the urethane adhesive to be separated from the window.
*
Leave a base of urethane on the pinch-weld flange.
*
The only suitable lubrication is clear water.
*
Use J 39032 or equivalent in order to remove the window.
