Rainier 2WD L6-4.2L VIN S (2005)
Windshield Washer Pump: Service and Repair
Washer Pump Replacement - Windshield
WASHER PUMP REPLACEMENT - WINDSHIELD
REMOVAL PROCEDURE
1. Remove the washer solvent container.
2. Disconnect the washer hose (4) from the pump (2).
3. Remove the pump (2) from the solvent container by carefully pulling pump from the retainer (1).
4. Remove the pump (2) from the sealing grommet (3).
5. Discard the old grommet.
INSTALLATION PROCEDURE
1. Install a new washer pump sealing grommet.
2. Install the pump (2) to the sealing grommet (3). Push downward to seat the pump.
3. Install the pump (2) to the retainer (1) on the solvent container. Push pump into the tank in order to secure the pump.
4. Connect the washer hose (4) to the pump (2).
5. Install the washer solvent container.
