Rainier 2WD V8-5.3L VIN P (2004)
1. Position the fascia to the vehicle impact bar.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the upper retaining bolts to the fascia.
Tighten the bolts to 2.5 N.m (22 lb in).
3. Install the screws that retain the fascia to the wheelhouse flanges.
Tighten the screws to 2 N.m (18 lb in).
4. Install and fully seat the lower push-pins.
5. Install the backup lamp socket assemblies, if applicable.