Rainier 2WD V8-5.3L VIN P (2004)
Sun Shade: Service and Repair
SUNROOF SUNSHADE PANEL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the sunroof window. Refer to Sunroof Window Replacement .
2. Remove the screws (1) that retain the water trough to the sunroof assembly.
3. Remove the water trough from the sunroof assembly from the top of the vehicle.
4. Slide the sunshade forward.
IMPORTANT: The sunshade must be removed from the top of the vehicle.
5. Flex the center of the sunshade (2) upward while simultaneously sliding the panel sideways to release the retaining tabs (3) from the track slot (1).
6. Remove the sunshade from the top of the vehicle.
INSTALLATION PROCEDURE
1. Position the sunshade to the vehicle from the top of the vehicle.
2. Install the retaining tabs on one side of the sunshade into the track slot of the sunroof.
3. Flex the center of the sunshade (2) upwards while simultaneously inserting the retaining tabs (3) into the track slot (1).
4. Ensure that the sunshade tabs are fully seated in the track slots, and the sunshade slides smoothly.
