Rainier 2WD V8-5.3L VIN P (2004)
3. Install the engine mount to the engine.
Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
4. Install the engine mount frame bracket to the frame.
5. Install the retaining bolts to the engine mount frame bracket.
6. Install the left side engine mount frame bracket.
7. Install the retaining bolts to the left side engine mount frame bracket.
Tighten the bolts to 100 Nm (74 ft. lbs.).
8. Lower the engine, aligning the engine mount studs with the holes in the frame bracket.
9. Remove the pole jack and block of wood.
10. Tighten the engine mount nuts.
Tighten the nuts to 50 Nm (37 ft. lbs.).
11. Install the shock module.
12. Install the engine protection shield.
13. Install the front tire and wheels.
14. Lower the vehicle. Refer to Vehicle Lifting.