Rainier 2WD V8-5.3L VIN P (2004)
19. Using mechanic's wire or metal hooks, secure the front shock modules to the frame. DO NOT let the shock modules and steering knuckle hang
without supporting them.
20. Reference mark the relationship of the propeller shaft to the front axle pinion yoke.
21. Remove the yoke retainer bolts and yoke retainers from the front axle pinion yoke.
22. Disconnect the propeller shaft from the front axle pinion yoke. Wrap the bearing caps with tape in order to prevent the loss or the bearing rollers.
Secure the propeller shaft to the frame.
23. Remove the transmission oil cooler lines from the retainer.
24. Remove the transmission oil cooler line retaining bracket bolt and bracket.
25. Remove the inner axle shaft.
26. Remove the starter.
27. Remove the Flywheel inspection cover from the left side of the transmission.
