Rainier 2WD V8-5.3L VIN P (2004)
Horn: Service and Repair
HORN REPLACEMENT
REMOVAL PROCEDURE
1. Remove the 2 left bolts (2) retaining the headlamp housing.
2. Remove the battery ventilation hose from the battery carrier.
3. Disconnect the horn assembly electrical connector.
4. Remove the bolt that retains the horn assembly to the body.
5. Remove the horn assembly from the body.
INSTALLATION PROCEDURE
1. Install the horn assembly to the body.
2. Install the bolt that retains the horn assembly to the body.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 10 N.m (88 lb in).
3. Connect the horn assembly electrical connector.
