Rainier 2WD V8-5.3L VIN P (2004)
Impact Sensor: Service and Repair
Front
INFLATABLE RESTRAINT FRONT END SENSOR REPLACEMENT
REMOVAL PROCEDURE
CAUTION:
-
Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely
fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system
repairs.
-
Refer to SIR Caution in Service Precautions.
1. Disable the SIR system.
2. Remove the grille.
3. Remove the headlamp wire harness from the retaining clip (1).
4. Raise and support the headlamp wire harness (1) to gain access to the front end sensor.