Rainier 2WD V8-5.3L VIN P (2004)
Lateral Stabilizer Rod: Service and Repair
Rear Axle Tie Rod Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Raise and support the rear axle at the designed D - height.
Important: When disconnecting the rear axle tie rod, the air suspension system must be Repressurized or the body my shift during the repair.
3. If equipped with air suspension, Repressurize the air suspension system.
4. Remove the rear axle tie rod to the axle mounting bolt and nut.
5. Remove the rear axle tie rod to frame mounting bolt and nut.
6. Remove the rear axle tie rod from the vehicle.
Installation Procedure
Important: When installing the rear axle tie rod the bushings inner sleeve off set (largest gap) is towards the rear axle.