Rainier AWD L6-4.2L (2007)
Antenna, Phone: Service and Repair
Cellular Communications/Digital Radio Antenna Replacement
Cellular Communications/Digital Radio Antenna Replacement
Removal Procedure
1. Lower the front portion of the headliner. Refer to Headlining Trim Panel Replacement.
2. Disconnect the electrical connectors from the digital radio antenna assembly.
3. Remove the retaining bolt and retainer from the antenna.
4. Squeeze the plastic retainer to release the antenna assembly from the roof panel.
5. Using an upward motion, remove the antenna assembly from the roof.
Installation Procedure
1. Install the antenna assembly to the top of the roof.
2. Lower the antenna assembly to the roof panel, ensuring the anti-rotation pin is properly indexed.
Notice: Refer to Fastener Notice.
3. Install the retainer and retainer bolt.
Tighten the bolt to 6 N.m (53 lb in).
4. Connect the antenna electrical connectors.
5. Install the headliner.
