Rainier AWD L6-4.2L (2007)
Hood Hinge: Service and Repair
Hood Hinge Bracket
Removal Procedure
1. Remove all of the related panels and components.
2. Restore as much of the damage as possible to the factory specifications.
3. Note the location and remove the following as necessary:
-
Sealers
-
Sound deadeners
-
Anti-corrosion materials
IMPORTANT: Do not damage any of the inner panels or reinforcements. Drill through the hinge bracket only.
4. Locate and drill out all factory welds. Note the number and location of welds for installation of the service part.
5. Remove the Hood Hinge Bracket.
Installation Procedure
