Rainier AWD L6-4.2L (2007)
Trunk / Liftgate Latch: Service and Repair
Liftgate Latch Replacement
Removal Procedure
1. Remove the liftgate window garnish molding.
2. Remove the liftgate trim panel.
3. Disconnect the outside handle rod from the bellcrank.
4. Disconnect the bellcrank rod from the latch/lock assembly.
5. Remove the screws that retain the bellcrank to the latch/lock.
6. Remove the bellcrank from the latch/lock.
7. Disconnect the electrical connector from the latch assembly.
8. Disconnect the lock cylinder bellcrank rod (1) from the latch assembly.
9. Remove the screws that retain the latch/lock assembly to the liftgate.
10. Remove the latch/lock assembly from the liftgate.
Installation Procedure