Rainier AWD L6-4.2L (2007)
17. Install the headliner harness to the left center pillar.
18. Install the following headliner harness clips to the center pillar:
*
The center pillar harness clips (1)
*
The center pillar harness clips (3)
*
The center pillar harness clips (4)
Notice: Refer to Fastener Notice.
19. Install the ground terminals and the ground bolt (2) to the center pillar.
Tighten the bolt to 10 N.m (88 lb in).
20. If equipped with OnStar(R) perform the following procedure:
1. Install the navigation antenna cable to the right center pillar.
2. Install the navigation antenna cable to the right side door sill attachments.
3. Install the navigation antenna cable to the communication interface module.
21. Install the sunshades to the headliner.
22. If equipped, install the overhead console.
23. Install the video display, if equipped.
24. Install the windshield garnish moldings.
25. Install the center pillar trim panels.
26. Install the rear side door sill plates.
27. Install the front side door sill plates.
28. Install the right sound insulator.
29. Install the rear seats.
30. Install the luggage/cargo shelf assembly, if equipped.
31. Install the cargo net, if equipped.
