Rainier AWD L6-4.2L (2007)
6. Compress the front brake caliper piston.
1. Install a large C-clamp over the top of the brake caliper housing and against the back of the outboard brake pad.
2. Slowly tighten the C-clamp until the piston pushes into the brake caliper enough to slide the brake caliper off the rotor.
3. Remove the C-clamp from the brake caliper.
7. Remove the mounting bolts from the brake caliper mounting bracket.
Important: When performing the following service procedure, the front brake caliper assembly and the front brake caliper mounting
bracket can be removed as an assembly.
8. Remove the brake caliper and mounting bracket assembly. Refer to Front Brake Caliper Bracket Replacement.
