Rainier AWD L6-4.2L (2007)
Brake Master Cylinder: Removal and Replacement
Master Cylinder Reservoir Replacement
Master Cylinder Reservoir Replacement
Caution: Refer to Brake Fluid Irritant Caution.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice.
Removal Procedure
1. Remove the brake master cylinder assembly. Refer to Master Cylinder Replacement.
2. Drain the brake fluid from the reservoir.
Notice: Do not clamp on the master cylinder body. Doing so may damage the master cylinder.
3. Clamp the flange of the master cylinder body in a vise.
4. Remove the retaining pins for the brake master cylinder reservoir.
5. Remove the reservoir from the brake master cylinder.
