Rainier AWD L6-4.2L (2007)
7. Connect the integral clip (3) to the wire harness bracket.
8. Connect the fuel feed (1) and fuel return (2) pipes to the fuel rail. Refer to Metal Collar Quick Connect Fitting Service.
9. Connect the ECT sensor electrical connector (1).
10. Install the PCM mounting studs (5) to the intake manifold.
Tighten the studs to 6 N.m (53 lb in).
11. Install the PCM (1) onto the studs (5).
12. Install the PCM retaining bolts (3).
Tighten the bolts to 8 N.m (71 lb in).
13. Install the PCM retaining nuts (6).
