Rainier AWD L6-4.2L (2007)
10
Install the stabilizer shaft. Refer to Stabilizer Shaft Replacement.
11. Install the A/C compressor 2 bottom bolts (4).
Tighten all 4 bolts (2, 3, 4) to 50 N.m (37 lb ft).
12. Install the oil level indicator and tube. Refer to Oil Level Indicator and Tube Replacement.
13. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
Important: Inspect the engine for oil leaks in order to ensure all sealing surfaces are sealed.
14. Fill the engine with oil. Refer to Engine Oil and Oil Filter Replacement.
