Rainier AWD L6-4.2L (2007)
Intake Manifold: Service and Repair
Intake Manifold Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
2. Relieve the fuel pressure. Refer to Fuel Pressure Relief.
3. Remove the throttle body. Refer to Throttle Body Assembly Replacement.
4. Remove the powertrain control module (PCM) retaining bolts (3) and nuts (6).
5. Remove the PCM. Refer to Powertrain Control Module Replacement.
Notice: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Notice.
6. Disconnect the fuel feed pipe (1) from the fuel rail. Refer to Metal Collar Quick Connect Fitting Service.
7. Disconnect the integral clip (3) from the wire harness bracket.