buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Crankshaft Rear Oil Seal and Housing Replacement|Page 4341 > < Crankshaft Rear Oil Seal and Housing Replacement|Page 4339

Rainier AWD L6-4.2L (2007)

Page 3
background image

8. Wipe off any excess material from the bottom of the oil pan sealing area (1).

9. Install the flywheel and secure with the bolts.

Tighten the flywheel bolts in sequence to 25 N.m (18 lb ft).

10. Use the J 36660-A to tighten the bolts an additional 50 degrees.
11. Install the transmission. Refer to Transmission Replacement (LL8) Transmission Replacement (LM4, LS2).

Crankshaft Rear Oil Seal and Housing Replacement|Page 4341 > < Crankshaft Rear Oil Seal and Housing Replacement|Page 4339