Rainier AWD L6-4.2L (2007)
Notice: Refer to Fastener Notice.
1. Install the exhaust manifold heat shield with the 4 nuts.
Tighten the exhaust manifold heat shield nuts to 10 N.m (89 lb in).
2. Install the oxygen sensor. Refer to Heated Oxygen Sensor 1 Replacement.
3. Install the oil level indicator. Refer to Oil Level Indicator and Tube Replacement.
4. Move the transmission filler tube back onto the stud and secure the tube with the nut.
Tighten the transmission filler tube bracket nut to 10 N.m (89 lb in).
5. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement.
