Rainier AWD L6-4.2L (2007)
Door/Trunk Ajar Indicator/Lamp: Description and Operation
Door Ajar Indicator Description and Operation
Door Ajar Indicator System Components
The door ajar indicator system consists of the following components.
*
The driver door module (DDM)
*
The passenger front door module (PDM)
*
The body control module (BCM)
*
The instrument panel cluster (IPC)
*
The driver information center (DIC)
*
The driver door ajar switch
*
The passenger door ajar switch
*
The left rear door ajar switch
*
The right rear door ajar switch
Driver Door Ajar And Passenger Door Ajar
The DDM and PDM receive a discrete input from the respective door ajar switch to indicate the status of the door. The DDM or PDM then
communicates this status to the IPC via class 2 message. The IPC, upon receipt of this class 2 message, will illuminate the appropriate door ajar message
in the DIC and also send a class 2 message to the radio to activate the door ajar audible warning when the following conditions are met:
*
The transmission is removed from PARK
*
The vehicle speed is greater then 8.05 km/h (5 mph)
Left Rear Door Ajar And Right Rear Door Ajar
The BCM receives a discrete inputs from both the left and right rear door ajar switches to indicate the status of the doors. The BCM then communicates
this status to the IPC via class 2 message. The IPC, upon receipt of this class 2 message, will illuminate the appropriate door ajar message in the DIC and
also send a class 2 message to the radio to activate the door ajar audible warning when the following conditions are met:
*
The transmission is removed from PARK
*
The vehicle speed is greater then 8.05 km/h (5 mph)