Rainier AWD L6-4.2L (2007)
Parts required to complete this service update are to be obtained from Saab Parts Distribution Center (PDC).
Service Procedure
Tools Required
J 45722 or equivalent
1.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in SI.
(1) Fuel Tank Label
(2) fuel Tank
(3) Rear Axle
2.
Locate the fuel tank label (1), which is on the backside of the fuel tank (2) below the fuel tank filler neck.
3.
Inspect the fuel tank for a white "X" on the fuel tank and/or a green "C" on the barcode.
^
If a white "X" on the fuel tank and/or a green "C" on the barcode is found, the fuel sender assembly does not require replacement. No further
action is required.
^
If a white "X" on the fuel tank and/or a green "C" on the barcode is not found, proceed to Step 4 for additional inspection.
