buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Dome Lamp|Service and Repair|Page 21248 > < Circuit Protection - Circuit Breakers|Page 21244
Page 1
background image

Dome Lamp: Service and Repair

DOME AND READING LAMP BULB REPLACEMENT

REMOVAL PROCEDURE

1. Carefully grasp the sides of the lens to partially expose the rear retaining tab.
2. Use a flat bladed tool in order to release the rear lens retaining tab.
3. Lower the rear edge of the lens away from the headliner.
4. Move the lens rearward in order to release the front horizontal retaining tab.

5. Remove the lens from the headliner.

6. If replacing the reading lamp bulb (1), remove the reflector (2) from the dome lamp.
7. Remove the reading lamp bulb from the socket.

8. If replacing the dome lamp bulb (1), remove the dome lamp bulb from the socket.

INSTALLATION PROCEDURE

Dome Lamp|Service and Repair|Page 21248 > < Circuit Protection - Circuit Breakers|Page 21244