Rainier AWD L6-4.2L (2007)
3. Remove the fill plug.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Install the drain plug.
Tighten the drain plug to 33 N.m (24 lb ft).
Important: With a complete drain and refill, subsutiute 4 oz (118 ml) of limited-slip axle lubricant additive.
2. Fill the rear drive axle.
^
Use the proper fluid, refer to Sealers, Adhesives, and Lubricants.
^
For the proper capacity, refer to Approximate Fluid Capacities.
