Rainier AWD L6-4.2L (2007)
12. Remove the EVAP/fuel hose/pipe assembly (4) from the fuel pipe clip at the rear of the engine.
13. Disconnect the EVAP purge pipe at the fuel tank.
14. Disconnect the chassis fuel feed pipe (1) from the fuel tank.
15. Disconnect the chassis EVAP pipe (2) from the fuel tank.
16. Remove the EVAP/fuel hose/pipe assembly from the vehicle.
Important: Note the position of the EVAP/fuel hose/pipe assembly clips before disassembly.
17. Remove the fuel/EVAP hose/pipe assembly retaining clips.
18. Separate the fuel feed pipe (1) from the EVAP purge pipe (2).
Installation Procedure
