Rainier AWD L6-4.2L (2007)
1. Position the fuel feed pipe (1) to the EVAP purge pipe (2).
2. Install the EVAP/fuel hose/pipe assembly clips as noted during disassembly.
3. Position the EVAP/fuel hose/pipe assembly along the engine and transmission.
4. Connect the chassis fuel feed pipe (1) to the fuel tank.
5. Connect the chassis EVAP purge pipe (2) to the fuel tank.
6. Install the EVAP/fuel hose/pipe assembly (4) to the fuel pipe clip at the rear of the engine.
7. Use the following procedure with 2WD:
