Rainier AWD L6-4.2L (2007)
6. Engage the sliding latch fastening the BCM to the rear electrical center. Slide the latch outboard until the locking tab (1) is fully seated.
7. Install the rear electrical center cover.
8. If replacing the BCM on a Chevrolet TrailBlazer or GMC Envoy, position the left hand second seat to a passenger position.
9. If replacing the BCM on a Chevrolet TrailBlazer EXT or GMC Envoy XL, install the left second row seat.
10. Connect the negative battery cable.
11. If installing a replacement BCM, program the BCM. Refer to Control Module References. See: Testing and Inspection/Programming and
Relearning
