Rainier AWD L6-4.2L (2007)
7. Connect the ECM electrical connector (1) to the TCM (2) if previously removed.
8. Install the ECM/TCM cover (2) to the ECM/TCM bracket (1).
9. Ensure the ECM/TCM cover retainers (2) are fully engaged with the ECM/TCM bracket (1).
10. Connect the cooling fan electrical connector.
11. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
12. If the TCM was replaced the replacement TCM must be programmed. Refer to Control Module References.
