Rainier AWD L6-4.2L (2007)
Gear Sensor/Switch: Service and Repair
NVG 226-NP8 - Transfer Case
Transfer Case Motor/Encoder Replacement (TrailBlazer, Envoy, Rainier)
Removal Procedure
Important: Before the motor/encoder is removed, ensure that the motor/encoder is in the 2HI position.
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the fuel tank shield, if equipped. Refer to Fuel Tank Shield Replacement (TrailBlazer EXT, Envoy XL) Fuel Tank Shield Replacement
(TrailBlazer, Envoy).
3. Disconnect the motor/encoder electrical connector (1).
4. Remove the motor/encoder mounting bolts.
